Dongguan Life-Style Casting Co.,Ltd
Home > News > Content
Product Categories
Contact Us

Dongguan Life-Style Casting Co.,Ltd

Address: Zhonghuiliyang Shidai, Dongcheng, Dongguan, Guangdong, China 523180

GeneralManager: Sherry Luo

Tel: 86-769-89865086

Mobile: 86-13712854626

Fax: 86-769-89865086

Whatsapp: 86-13712854626

E-mail: info@life-stylecasting.com

               sherryluo86@gmail.com 

Skype: miaomiao91919

www.lifestylecasting.com

Pump And Valve Casting Part Is The Right Choice For Casting Temperature

Pump and Valve Casting Part is the right choice for casting temperature
  Pump And Valve Casting Part in the casting production, for the temperature has a high demand, pouring temperature, whether too high or too low, will cause a certain energy waste, then how do we control the pump and Valve Casting Part pouring temperature?
  Pump and Valve Casting Part production of high temperature pouring will make the proportion of waste greatly increased, pouring temperature is too high will cause sand swelling, especially with a complex sand core Pump And Valve Casting Part, when the pouring temperature reaches 1460 When the proportion of waste will reach half. In the production, the use of induction furnace melting can better control the temperature of molten iron.
  Pump And Valve Casting Part will also be pouring temperature is too low, and the temperature is too low often think of some defects. When the temperature is too low, it may cause a small amount of slag in the pores to block the pores, making the exhaust effect is not good. In the production process of Pump And Valve Casting Part, the pouring of molten iron in the micro-reducing atmosphere, coupled with the low pouring temperature, produces liquid slag, resulting in an impact. The reason for the low pouring temperature is due to the fact that the molten iron is cooled and transported for a long time in the open ladle. Simply use a ladle lid with a thermal insulation material to significantly reduce heat loss.
 Pump And Valve Casting Part manufacturers in the pump And Valve Casting Part processing and production, the factors to be taken into account is the different aspects, at this time only we can take into account a variety of different factors, then the customer can really Buy the pump and Valve Casting Part that is suitable and available, what are the main considerations when we work on Pump And Valve Casting Part? In the end we need to consider what the first thing is, and then what , These content can be reversed?
 Pump And Valve Casting Part Pumping and Valve Casting Part Pumping and Valve Casting Part Pumping and Valve Casting Part Pumping and Valve Casting Part Pumping and Valve Casting Part Pumping and Valve Casting Part Pumping and Valve Casting Part Pumping and Valve Casting Part , If we want to use these substances at this time, then we are in the processing of the first consideration is practical. But many people will ask, we do not take into account the rational processing of the process? This point we need to consider, but we mainly need to first consider its practicality, followed by the process is the problem.
So in the Pump And Valve Casting Part Pump And Valve Casting Part processing when we consider the problem do not upside down. No matter what time, we use the effect must be on the first place, the other effects are on the second place, so we must recognize this situation.
Pump And Valve Casting Part is a kind of use of a lot of mechanical equipment. Pump And Valve Casting Part There are many types of Pump And Valve Casting Part, mainly Pump And Valve Casting Part, Ductile Iron Castings. Pump And Valve Casting Part is at a reasonable price, and the use of Pump And Valve Casting Part is more and more. Frequent cleaning of the Pump And Valve Casting Part can effectively extend the life of the Pump And Valve Casting Part.
In order to protect the life of the Pump And Valve Casting Part, it is very important to carry out the necessary cleaning work on a regular basis. The following Pump And Valve Casting Part manufacturers tell you the correct cleaning method. First of all, cleaners to the first in a hurry after the principle of each furnace to clean up the castings. Second, in the cleaning of castings, you should first check the surface of the casting is not a serious defect, if there are serious defects, but can not determine whether the scrap after the clean-up, should be reported in a timely manner. Also, in the cleaning of castings can not damage the edge of the casting, edges and corners, thin-walled castings can not use sledgehammer. Finally, in the cleaning of large and medium-sized castings, should be placed in a solid place for cleaning; flip, the hook should be linked to avoid casting or fall or collision. The above is the cleaning method for Pump And Valve Casting Part, hope you can help.