Dongguan Life-Style Casting Co.,Ltd
Home > News > Content
Product Categories
Contact Us

Dongguan Life-Style Casting Co.,Ltd

Address: Zhonghuiliyang Shidai, Dongcheng, Dongguan, Guangdong, China 523180

GeneralManager: Sherry Luo

Tel: 86-769-89865086

Mobile: 86-13712854626

Fax: 86-769-89865086

Whatsapp: 86-13712854626

E-mail: info@life-stylecasting.com

               sherryluo86@gmail.com 

Skype: miaomiao91919

www.lifestylecasting.com

Pump Casting Repair Infiltration

Because the casing of the materials more expensive, poor working conditions, leak a lot of places, by simple welding difficult to achieve their goals. Depending on the size and location of trachoma infiltration, you can choose different type of cast iron impregnating agent.

1. Pressure test methods to determine the exact location of the leakage of the workpiece, and marked with the mark.

2. Place the pump housing on the electric resistance furnace or oven heated to 200 to 250 degrees Celsius, insulation 2h, to clear the pores of the penetration of moisture.

3. The surface treatment. Steel brush to remove parts of the surface to be repaired oxide layer, and then bananas, water or acetone-clean, dry.

4. dipping. Plasticine in the desired area with built-impregnated into a small circle of glue to ensure focus, then continue to the inner circle to glue until filled blisters.

5. Sealing curing. According to the above formula good deployment epoxy glue, porous finish dip ends smear glue, room temperature curing 24h.